TITLE 32 PRODUCTION CONTROLLER GS-1152-09 with Security Clearance

---

Job description

Duties Position Description # NGD This position is located in the Joint Forces Headquarters-State, Logistics Directorate (J-4/G-4), Surface Maintenance Facility. The purpose of this position is to perform maintenance production management, to achieve or maintain desired production levels, to serve as an equipment readiness expert for units supported by the facility, and to provide technical guidance and oversight to a lower-graded Production Controller. Description of Duties: (1) Establishes plans and schedules for maintenance and repair, using multiple process production methods and procedures for a variety of vehicles and equipment such as combat vehicles, heavy-duty engineering and mobile equipment, tracked vehicles, towed and self-propelled artillery, communications and electronic equipment, guided missile systems, and small arms. Implements maintenance plans and monitors progress of accomplishments. Using readiness, production and management reports available from the current automation support program and/or manual system, provides status of equipment, maintenance actions in progress, and location of equipment as required or requested. Responsible for data input of work order information, status changes, supply updates, and other pertinent information. Makes on-the-spot adjustments to repair priorities necessitated by unscheduled maintenance requirements. (2) Ensures Modified Table of Organization and Equipment (MTO&E) or Table of Distribution and Allowances (TDA) reportable Line Item Numbers (LIN) are properly managed, reported and accounted for with respect to readiness reports, property accountability reports, and system management. Based on guidance received, prioritizes resources to ensure the highest level of readiness in support of training and mobilization requirements of supported units. Ensures that Army Materiel Status System (AMSS) equipment readiness reports are correct and submitted in a timely manner to meet Department of the Army (DA) reporting suspense. (3) Programs workload, shop space, and available personnel on a short and long-term basis. Conducts initial and long range planning on matters which include multiple process production, maintenance operations, equipment readiness, including mechanical skills, availability of test and diagnostic equipment, repair parts, annual training requirements, mobilization requirements; and other factors influencing the repair, modification, and maintenance of equipment and readiness reporting. (4) Ensures that unit Class 9 (CL IX) accounts are funded, budgeted, and executed to maximize readiness. Performs demand analysis on unit CL IX expenses to determine proper stockage to sustain unit mission requirements. (5) Designates and maintains current maintenance priorities by Force Activity Designator, pacing items, Equipment Readiness Codes (ERC) A, B, and C equipment type, available funds, commander's priority, state/national priorities (in the case of floods, fires, and mobilizations), and unit supported. Using the current automation support system, authorizes the acceptance of equipment for repair; monitors work priorities, current status, and completion of work orders; requisitions and provides status of repair parts; and assures the effective utilization of maintenance personnel. Provides both standard and ad hoc reports on the status of work orders to the supervisor and/or units. Assists supervisory personnel regarding readiness, CL IX funding, production problems and work planning. Assists in the resolution of problems encountered between scheduled or unscheduled production or priority requirements. (6) Analyzes repair methods and develops control procedures and policies to assure accomplishment of programs to meet priorities and deadlines established by higher authority or support activities. Ensures that this is performed in the most effective and efficient manner possible with good quality control and quality assurance procedures in place. Coordinates with units and other support activities concerning the delivery, status of repair operations, and/or pick up of completed work orders. Coordinates with logistical personnel, equipment specialists, higher ranked management officials, item managers at depots concerning critical shortages of repair parts required to support the maintenance repair program. (7) Provides technical guidance and oversight to a lower-graded Production Controller. May provide guidance and oversight of mechanics, Tools and Parts Attendants, or other positions assisting in the maintenance production or maintenance management processes. Ensures necessary maintenance workers are available and that required reports are submitted to units and higher headquarters in a timely manner. (8) Performs other duties as assigned. Requirements Conditions of Employment NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position. This is an excepted service position that requires membership in military assignment in WV's National Guard, and is required prior to the effective date of placement. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. Male applicants born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered, or you are not eligible for appointment in this agency. Federal employment suitability as determined by a background investigation. May be required to successfully complete a probationary period. Participation in direct deposit is mandatory. U.S. Citizenship is required. Required to obtain and maintain a satisfactory security clearance, AND, as a minimum, a completed National Agency Check (NAC) prior to assignment. The agency will provide additional information regarding what information or documentation will be needed and how you can request of the agency a legally required exception from this requirement. Must be able to obtain and maintain the appropriate security clearance of the position. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission. Irregular and/or overtime (compensatory) hours may be required to support operational requirements or contingencies or may be required to work hours outside of the normal duty day. The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission. Qualifications MINIMUM MILITARY GRADE: E-4 MAXIMUM MILITARY GRADE : CW3 Your rank MUST be included somewhere within your resume. You must fully substantiate in your own words that you meet the requirements listed below. When explaining minimum requirements and specialized experience you must give examples. Do not copy from the vacancy announcement or the position description. Explain it in your own words and give examples to be considered for this vacancy. All personnel applying for this position who do not meet the minimum military grade requirement MUST provide the proper signed memorandum from your respective Military Personnel Office (MILPO for ARNG, FSS for ANG) to prove eligibility to obtain the required grade upon accepting the position. All personnel who exceed the maximum military rank must provide a memorandum explaining if selected for this position, you will accept an administrative reduction in rank. The memorandum must be submitted WITH your application to be considered for this position. MINIMUM REQUIREMENTS: Experience, education or training which indicates the candidate can reason in quantitative terms, communicate orally and in writing in a clear and concise manner, understanding the terminology and data pertaining to repair operations and process characteristics of the production activity. SPECIALIZED EXPERIENCE: Experience, education or training scheduling workflow in more than one area and responsible for coordinating products or materials from support activities. Experience in performing or supervising journeyman level work in a production facility. Experience preparing job or work orders; scheduling various phases of projects into the production facility; following up to see if work is progressing as planned and arranging for adjustments in materials, machine processes, and work sequencing allowing for changes. Experience with current automation support programs to input data, provide status of equipment, and monitor job order status, monitor work priorities, requisition repair parts, track repair parts status, etc. Education There are no educational requirements for this position. Additional information Permanent Change of Station: PCS funds are not available for this position. Incentives: Relocation and Recruitment Incentives may be authorized for this position. All WVNG positions are pending availability of resources and funds. Areas of Consideration: Area 1: Current On-board Title 5 Employees and Title 32 Technicians (Tenure: 1- Permanent, 2-Conditional, 3-Indefinite) and Permanent AGR's in the West Virginia National Guard. Area 2: WVNG Army M-Day and Air Force DSG (Drill-Status Guardsmen,) Temporary Title 32 Technicians and Title 5 Employees, Temporary AGR (OTOT), and national guardsmen serving on Full-time National Guard Duty - Operational Support Orders

<!– job description page –>